8. REMOVE REMOTE FILTER ADAPTER

7. REMOVE COVER PLATE, A-FLANGE ADAPTER AND GEROTOR SET

10. REMOVE FRONT COVER, GASKET, AND SWASH PLATE

TM-5-3895-373-34 Paving Machine Bituminous Material Crawler Mounted Diesel Engine Driven Manual
Page Navigation
427

TM 5-3895-373-34 B. DISASSEMBLE Continued. 8. REMOVE REMOTE FILTER ADAPTER. a. Remove hex head cap screws (73) and remote filter adapter (74). b. Use an o-ring tool to remove filter adapter seal (75). Discard filter adapter plain seal. 9. REMOVE ELECTRONIC DISPLACEMENT CONTROL. NOTE If pump pilot control valve is being removed, refer to paragraph 2.31. a. Remove hex head cap screws (76 and 77) and electronic displacement control (78). Use caution when removing preformed packings and packing retainers. Scratched or dented seal grooves can cause bypass leakage. Do not use excessive force to remove preformed packings and packing retainers. Use an o-ring tool to remove preformed packings and packing retainers. b. Use an o-ring tool to remove preformed packings (79, 80, and 81) from electronic displacement control. Discard preformed packings. c. Remove spool (82) by carefully prying out with a thin, flat-blade screwdriver. GO TO NEXT PAGE 2-403

Privacy Statement
Press Release
Contact