TM 5-3895-373-34
A.
REMOVE.
1.
DISCONNECT
ELECTRICAL
CONNECTIONS
AND
HYDRAULIC
HOSES
FROM
RIGHT
PROPULSION PUMP.
a.
Disconnect pump pilot control valve electrical
connector (1) from harness electrical connector
(2).
b.
Disconnect hydraulic oil temperature sensor
knurled nut (3) and remove harness ring terminal
(4).
Thoroughly clean hydraulic hoses and
fittings before disconnecting. Always
plug or cap off disconnected fittings to
prevent
intrusion
of
contaminants.
Failure to properly clean and cap off
connectors
may
result
in
hydraulic
system contamination and equipment
damage.
c.
Wipe off hydraulic hoses and fittings with a
cleaning cloth.
d.
Place
machinery
wiping
towels
beneath
propulsion pump.
GO TO NEXT PAGE
2-395
