TM 5-3895-373-34
D.
INSTALL - Continued.
7.
INSTALL FUEL HOSES.
a.
Install hose (14) tagged "FROM FUEL FILTER"
onto fitting (15). Tighten hose clamp (13).
b.
Install hose (8) tagged "TO SCREED FUEL
FILTER" onto elbow (9).
c.
Install hose (11) tagged "TO FUEL/WATER
SEPARATOR" onto fitting (12). Tighten hose
clamp (10).
8.
INSTALL BULKHEAD PARTITION.
a.
Install bulkhead partition (7). Inner two
mounting holes must mate with threaded studs
in bulkhead frame.
b.
Install lockwasher (5) and flat washer (6) onto
hex head cap screw (4).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Apply thread locking compound (Item 14,
Appendix B) to threads of hex head cap screw
(4).
d.
Install hex head cap screw (4) through
bulkhead partition (7). Tighten cap screw to 9
lb-ft (12 N•m).
e.
Apply thread locking compound (Item 14,
Appendix B) to threads of partition mounting studs.
f.
Install flat washers (3), lockwashers (2), and
hex nuts (1). Tighten hex nuts to 9 Ib-ft (12
N•m).
NOTE
FOLLOW-ON-TASKS:
Install engine per paragraph 2.16.
Install screed tow arm per TM 5-3895-373-20.
END OF TASK
2-319
