TM 5-3895-373-34
SECTION V. COOLING SYSTEM MAINTENANCE
Para
Page
Repair Water Pump...............................................................................................................................
2.23
2-320
2.23 REPAIR WATER PUMP.
This task covers:
a
Disassemble
b. Clean
c.
Assemble
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-20
(Item 106, Appendix D)
TM 5-3895-373-24P
Cleaning brush (Item 12, Appendix D)
Hydraulic press frame (Item 41, Appendix D)
Equipment Condition:
Plastic hammer (Item 49, Appendix D)
Water pump removed per TM 5-3895-373-20.
Snap ring pliers (Item 66, Appendix D)
Thickness gage (Item 46, Appendix D)
Torque wrench (Item 132, Appendix D)
Universal puller kit (Item 69, Appendix D)
Materials/Parts:
Cleaning cloth (Item 6, Appendix B)
Cleaning solvent (Item 31, Appendix B)
Grease (Item 18, Appendix B) -,J
Repair kit
A.
DISASSEMBLE.
1.
REMOVE IMPELLER, SHAFT, BEARINGS,
AND SEALS FROM BEARING BODY.
Use care when removing snap and
retaining rings. Wear eye protection
when removing snap and retaining
rings. Snap and retaining rings are
under spring tension and can act as
projectiles when released and could
cause severe eye injury.
a.
Use snap ring pliers to remove snap ring (1)
from bearing body (2). Discard snap ring.
GO TO NEXT PAGE
2-320
