TM 5-3895-373-34
2.22.
REPLACE/REPAIR FUEL TANK - Continued
D.
INSTALL.
1.
INSTALL FUEL LEVEL TRANSMITTER.
a.
Position gasket (35) on fuel tank (30).
NOTE
Float ball can become dislodged from
float lever and fall into fuel tank. To
avoid dislodging float ball, insert fuel
level transmitter carefully.
b.
Position fuel level transmitter float ball to face
rear of fuel tank (30).
c.
Install fuel level transmitter (23). Line up holes
in fuel level transmitter and gasket (35) with
threaded holes in fuel tank (30).
Do not use metric screws provided
with
replacement
fuel
level
transmitter. Reuse machine screws
(32) that were removed from tank.
Use of metric screws will damage
tank screw threads.
d.
Coat connector tab of fuel level transmitter
ground
terminal
with
electrical
insulating
compound.
e.
Install gaskets (33), machine screws (32), and
ground jumper (34). Tighten machine screws
evenly.
f.
Install ground jumper (34) to connector tab of
fuel level transmitter ground terminal.
GO TO NEXT PAGE
2-314
