TM 5-3895-373-34
A.
REMOVE - Continued.
10.
REMOVE
LIFTING
BRACKETS,
CYLINDER
HEAD
END
COVER,
THERMOSTAT HOUSING, AND STUDS
FROM CYLINDER HEAD ASSEMBLY.
a.
Remove hex head cap screws (68),
lockwashers (69) and front and rear lifting
brackets
(64
and
65).
Discard
lockwashers.
b.
Remove screw (70) and lockwasher (71).
Discard lockwashers.
c.
Remove screws (72), lockwashers (73),
washer (74) and cylinder head end cover
(75). Discard lockwashers. Only the top
center screw uses washer (74).
d.
Remove and discard end cover gasket (76).
e.
Remove
engine
coolant
temperature
transducer (39) from thermostat housing
(25).
f.
Remove bolts (77) and lockwashers (78).
Discard lockwashers.
g.
Remove screws (79) and lockwashers (80).
Discard lockwashers.
h.
Remove screw (81) and lockwasher (82).
Discard lockwasher.
i.
Remove bolt (83) and lockwasher (84).
Discard lockwasher.
j.
Remove hex nut (85), lockwasher (86) and
thermostat
housing
(25).
Discard
lockwasher.
k.
Remove and discard thermostat housing
gasket (87).
GO TO NEXT PAGE
2-69
