TM 5-3895-373-34
2.15
REPLACE CYLINDER HEAD ASSEMBLY - Continued.
A.
REMOVE - Continued.
d.
Tag wire 105 (37), remove knurled nut (35) from
terminal on coolant temperature sensor (36),
and disconnect wire 105. Reinstall knurled nut
onto terminal.
e.
Tag and disconnect wiring harness connector
(38) to engine coolant temperature transducer
(39).
6.
REMOVE VALVE COVER, VALVE COVER
GASKET, AND OIL BREATHER HOSE FROM
CYLINDER HEAD ASSEMBLY.
a.
Loosen hose clamp (40) and disconnect oil
breather hose (41) from valve cover (42).
b.
Remove bolts (43), lockwashers (44), and
washers (45). Discard lockwashers.
c.
Remove valve cover (42) from cylinder head
assembly (15).
d.
Remove and discard valve cover gasket (46).
GO TO NEXT PAGE
2-66
