TM 5-3895-373-34
2.15
REPLACE CYLINDER HEAD ASSEMBLY - Continued.
A.
REMOVE - Continued.
2.
REMOVE MUFFLER SUPPORT BRACKET.
a.
With the assistance of a second person, support
the weight of muffler support bracket (7).
b.
Remove hex nuts (8), lockwashers (9), flat
washers (10), socket head cap screws (11), and
muffler
support
bracket
(7).
Discard
lockwashers.
3.
DISCONNECT FUEL LINES FROM CYLINDER
HEAD ASSEMBLY.
a.
Remove screw (12), lockwasher (13), and clamp
(14) from cylinder head assembly (15). Discard
lockwasher.
b.
Remove screw (16), lockwasher (17), washer
(18), and clamps (19 and 20). Position induction
heater fuel pipe (21) and fuel inlet hose (22) so
that there is no interference during cylinder head
assembly removal. Discard lockwasher.
GO TO NEXT PAGE
2-64
