TM 5-3895-373-20
13.6.
REPLACE HYDRAULIC RETURN FILTER ASSEMBLY.
This task covers:
a.
Remove
b.
Install
INITIAL SETUP
Tools:
Personnel Required:
General mechanic’s automotive tool kit
Two 62B construction equipment repairers. Second person
(Item 54, Appendix E)
required to hold hydraulic return filter assembly during
Bench vise (Item 55, Appendix E)
removal and installation of hydraulic hoses.
Combination wrench (Item 58, Appendix E)
Drip pan (Item 28, Appendix E)
References:
Oil filter removal tool (Item 36, Appendix E)
TM 5-3895-373-10
Torque wrench (Item 68, Appendix E)
TM 5-3895-373-24P
Materials/Parts:
Equipment Condition:
Cleaning cloth (Item 7, Appendix C)
Left access door opened per TM 5-3895-373-10.
Cleaning solvent (Item 24, Appendix C)
Left access cover removed per TM 5-3895-373-10.
Hydraulic fitting sealant (Item 21, Appendix C)
Hydraulic oil (Item 18, Appendix C)
Lint-free cloth (Item 8, Appendix C)
Machinery wiping towels (Item 30, Appendix C)
Pipe sealant (Item 22, Appendix C)
Protective caps (Item 5, Appendix C)
Tags (Item 27, Appendix C)
Thread locking compound (Item 13, Appendix C)
Thread locking compound solvent (Item 25, Appendix C)
Hydraulic return filter assembly
Lockwashers
A.
REMOVE.
1.
REMOVE HYDRAULIC RETURN FILTER
ASSEMBLY WITH ELBOWS.
a.
Remove bolts (1) and lockwashers (2). Discard
lockwashers.
b.
Pull hydraulic return filter assembly (3) out
toward center of access cover opening.
GO TO NEXT PAGE
13-35
