13.5. REPLACE HIGH SPEED SHIFT AND BRAKE VALVE SOLENOID ASSEMBLIES AND STACK VALVE ELECTRICAL COILS

2. INSTALL BRAKE VALVE SOLENOID ASSEMBLY

3. INSTALL STACK VALVE ELECTRICAL COIL

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
936

TM 5-3895-373-20 13.5. REPLACE HIGH SPEED SHIFT AND BRAKE VALVE SOLENOID ASSEMBLIES AND STACK VALVE ELECTRICAL COILS - Continued. B. INSTALL - Continued. e. Apply electrical insulating compound to male end of electrical connector (8) and install into female harness connector. Thread locking compound solvent can cause eye damage. Wear safety goggles/glasses when using. Avoid contact with eyes. If solvent contacts eyes, flush eyes with water and get immediate medical attention. f. Clean threads of hex head cap screw (5) with thread locking compound solvent. g. Install lockwasher (6) and ground wire (7) on hex head cap screw (5). Thread locking compound can cause eye damage. Wear safety goggles/glasses when using. Avoid contact with eyes. If compound contacts eyes, flush eyes with water and get immediate medical attention. h. Apply thread locking compound to threads of hex head cap screw (5). i. Install hex head cap screw (5). Tighten hex head cap screw to 37 Ib-ft (50 N•m). Electrical insulating varnish fumes can be harmful if inhaled. Use only in a well ventilated area. Avoid prolonged exposure to fumes. If personnel become dizzy or drowsy during use, get immediate medical attention. j. Apply electrical insulating varnish to ground wire (6) ring terminal. GO TO NEXT PAGE 13-32

Privacy Statement
Press Release
Contact