TM 5-3895-373-20
C.
INSTALL - Continued.
2.
INSTALL FILTER ELEMENT AND FILTER
BOWL.
WARNING
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
a.
Coat o-ring (18) with clean hydraulic oil.
b.
Install filter element (6) onto filter head (13).
c.
Coat o-ring (7) with hydraulic oil. Install o-
ring ring seal (8) into packing ring groove
on filter bowl (5).
d.
Fill filter bowl (5) half full with clean
hydraulic oil. Raise the cover slowly onto
filter element (6) allowing time for the
element to soak up the hydraulic oil
e.
Install filter bowl (5) onto filter head (13).
f.
Tighten filter bowl to 10 lb-ft (14 N.m).
GO TO NEXT PAGE
8-15
