TM 5-3895-373-20
A.
REMOVE - Continued.
NOTE
Use of all removal and installation
procedures
is
not
required
if
replacing
entire
hydraulic
charge
filter assembly. If replacing entire
filter assembly, proceed with step 4
and follow procedure to remove filter
head. Use procedures as needed to
replace
faulty
or
damaged
components.
CAUTION
Use caution when removing o-rings.
Scratched or dented o-ring grooves
can cause bypass leakage. Do not
use excessive force when removing
o-rings. Use an o-ring tool to remove
o-rings.
2.
REMOVE CLOGGING INDICATOR (2) USING
A 1-1/16 INCH DEEP SOCKET WRENCH. USE
O-RING TOOL TO REMOVE O-RINGS (3 AND
4).
GO TO NEXT PAGE
8-11
