8.3.
REPLACE HYDRAULIC CHARGE FILTER ASSEMBLY - Continued.
A.
REMOVE - Continued.
3.
REMOVE
FILTER
BOWL
AND
FILTER
ELEMENT.
WARNING
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
NOTE
Filter bowl may be full of hydraulic
oil.
a.
Place machinery wiping towels under filter
bowl (5).
b.
Remove filter bowl (5) and drain hydraulic
oil into a drip pan. Keep filter bowl upright
during removal.
c.
Remove filter element (6).
d.
Dispose of hydraulic oil, contaminated
machinery
wiping
towels,
and
filter
element
in
accordance
with
local
procedures.
CAUTION
Use caution when removing seals
and o-rings. Scratched or dented seal
grooves can cause bypass leakage.
Do not use excessive force when
removing seals and o-rings. Use an
o-ring tool to remove seals and o-
rings.
e.
Use o-ring tool to remove o-ring (7) and o-
ring ring seal (8). Discard o-ring and o-ring
ring seal.
Go To NEXT PAGE
8-12
