TM 5-3895-373-20
C.
INSTALL - Continued.
2.
INSTALL HYDRAULIC OIL COOLER.
a.
Lower hydraulic oil cooler (2) through front
top left access door opening.
b.
Install lockwashers (10) and flat washers
(11) onto hex head cap screws (9).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Apply thread locking compound to threads
of hex head cap screws (9).
d.
Install hex head cap screws (9) with
lockwashers (10) and flat washers (11).
Tighten to 37 lb-ft (50 N.m).
WARNING
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
e.
Apply hydraulic fitting sealant to threads of
installed straight adapters (7).
f.
Using
combination
wrenches,
secure
installed straight adapters (7), and connect
inlet tube (8) and hose (4) to hydraulic oil
cooler (2).
GO TO NEXT PAGE
8-7
