TM 5-3895-373-20
8.2.
REPLACE HYDRAULIC OIL COOLER - Continued.
C.
INSTALL - Continued.
g.
Install lockwashers (6) onto bolts (5).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
h.
Apply thread locking compound to threads
of bolts (5).
i.
Secure hydraulic return filter (3) with bolts
(5) and lockwashers (6). Tighten bolts to
14 lb-ft (19 N.m).
WARNING
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
j.
Apply hydraulic fitting sealant to adapter
threads on hydraulic return filter (3).
Install free end of hose (4) with 1-1/2 in.
combination wrench.
k.
Install
sound
foam
(1)
into
engine
compartment.
l.
Start and warm up paving machine per TM
5-3895373-10. With paving machine at
high idle, raise and lower screed two or
three times.
m.
Shut down paving machine.
NOTE
FOLLOW-ON TASKS:
Add hydraulic oil per TM 5-3895-373-10.
Close front top left access door per TM 5-3895-373-10.
Close left access door per TM 5-3895-373-10.
Install left access cover per TM 5-3895-373-10.
END OF TASK
8-8
