3. INSTALL BATTERY CABLES - TM-5-3895-373-20

2. INSTALL STARTER CABLES AND ENGINE HARNESS WIRES

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
660

TM 5-3895-373-20 7.4. REPLACE STARTER - Continued. B. INSTALL - Continued. 3. INSTALL BATTERY CABLES. When connecting batteries, connect positive battery cable before connecting negative battery cable. Failure to connect batteries in the proper sequence may lead to electrical shock or short circuit and result in personnel injury. a. Reconnect positive battery cable (6) and battery nut (4) to positive terminal of inboard battery. b. Reconnect negative battery cable (5) and battery nut (4) to negative terminal of outboard battery. Electrical insulating varnish fumes can be harmful if inhaled. Use only in a well ventilated area. Avoid prolonged exposure to fumes. If personnel become dizzy or drowsy during use, get immediate medical attention. c. Apply electrical insulating varnish to battery terminals. d. Install rubber battery terminal caps (3) onto battery terminals. e. Install battery box covers (2) and buckle battery box holddown straps (1). NOTE FOLLOW-ON-TASKS: Install engine access cover per paragraph 2.22. Close rear top left access door per TM 5-3895-373-10. Close front top left access door per TM 5-3895-373-10. Install left access cover per TM 5-3895-373-10. END OF TASK 7-18

Privacy Statement
Press Release
Contact