TM 5-3895-373-20
7.4.
REPLACE STARTER.
This task covers:
a.
Remove
b.
Install
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-10
(Item 54, Appendix E)
TM 5-3895-373-24P
Torque wrench (Item 68, Appendix E)
Material/Parts:
Equipment Condition:
Cleaning cloth (Item 7, Appendix C)
Engine access cover removed per paragraph 2.22.
Cleaning cloth (Item 7, Appendix C)
Front top left access door open per TM 5-3895-373-10.
Electrical insulating varnish (Item 32, Appendix C)
Rear top left access door open per TM 5-3895-373-10.
Thread locking compound (Item 12, Appendix C)
Rear top left access door open per TM 5 -3895-373-10.
Thread locking compound solvent (Item 25, Appendix C)
Lockwashers
Starter
A.
REMOVE.
1.
REMOVE BATTERY CABLES.
a.
Unbuckle battery box holddown straps (1) and
remove battery box covers (2) from both
batteries.
b.
Lift rubber battery terminal caps (3) from battery
terminals.
When
disconnecting
batteries,
disconnect negative battery cable
before disconnecting positive battery
cable. Failure to disconnect batteries
in the proper sequence may lead to
electrical shock or short circuit and
result in personnel injury.
c.
Remove battery nut (4) and negative battery
cable (5) from negative terminal of outboard
battery.
d.
Remove battery nut (4) and positive battery
cable (6) from positive terminal of inboard
battery.
GO TO NEXT PAGE
7-14
