4.10. REPLACE COLD START INDUCTION HEATER.

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
598

TM 5-3895-373-20 4.10. REPLACE COLD START INDUCTION HEATER. This task covers: a. Remove b. Install INITIAL SETUP Tools: References: General mechanic’s automotive tool kit TM 5-3895-373-10 (Item 54, Appendix E) TM 5-3895-373-24P Crowfoot wrench (Item 63, Appendix E) Torque wrench (Item 66, Appendix E) Equipment Condition: Front top left access door open per TM 5-3895-373-10. Materials/Parts: Front top right access door open per TM 5-3895-373-10. Anti-seize compound (Item 9, Appendix C) Engine access cover removed per paragraph 2.22. Electrical insulating compound (Item 11, Appendix C) Machinery wiping towel (Item 30, Appendix C) Compression sleeves Induction heater A. REMOVE. 1. DISCONNECT INDUCTION HEATER FUEL PIPE. Fuel is very flammable and can explode easily. To avoid serious injury or death: Always wear safety glasses/goggles at all times. Keep at least a B-C fire extinguisher within easy reach when working with fuel or on a fuel system. Do not work on fuel system when engine is hot; fuel can be ignited by a hot engine. Post signs that read "NO SMOKING WITHIN 50 FEET" when working with open fuel lines or fuel tanks. a. Place machinery wiping towels beneath fuel filter and tube coupling nut (1). b. Unscrew tube coupling nut (1). GO TO NEXT PAGE 4-62

Privacy Statement
Press Release
Contact