g. Lubricate rubber compression sleeves

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
596

TM 5-3895-373-20 4.9. REPLACE FUEL FILTER ASSEMBLY - Continued. B. INSTALL - Continued. Fuel is very flammable and can explode easily. To avoid serious injury or death: Always wear safety glasses/goggles at all times. Keep fuel away from open flame or any spark (ignition source). Keep at least a B-C fire extinguisher within easy reach when working with fuel or on a fuel system. Do not work on fuel system when engine is hot; fuel can be ignited by a hot engine. Post signs that read "NO SMOKING WITHIN 50 FEET" when working with open fuel lines or fuel tanks. f. Adjust multiple connector (13) so that one fitting is pointing toward the front of the engine and the other is pointed away from the cylinder head assembly. Tighten fluid passage bolt (18). g. Lubricate rubber compression sleeves (17) with clean fuel. h. Install rubber compression sleeves (17) onto metal tube (15) and connect to multiple connector (13) and fuel injector (16). Tighten tube coupling nuts (14). i. Connect fuel hose (12) to the tube at multiple connector (13). Tighten hose clamp (11). GO TO NEXT PAGE 4-60

Privacy Statement
Press Release
Contact