B. INSTALL. 1. INSTALL FITTINGS AND CONNECTORS ONTO FUEL FILTER ASSEMBLY

2. REMOVE FITTINGS AND CONNECTORS FROM FUEL FILTER ASSEMBLY

B. INSTALL - Continued - TM-5-3895-373-20_602

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
593

TM 5-3895-373-20 B. INSTALL. 1. INSTALL FITTINGS AND CONNECTORS ONTO FUEL FILTER ASSEMBLY. Fuel is very flammable and can explode easily. To avoid serious injury or death: Always wear safety glasses/goggles at all times. Keep fuel away from open flame or any spark (ignition source). Keep at least a B-C fire extinguisher within easy reach when working with fuel or on a fuel system. Do not work on fuel system when engine is hot; fuel can be ignited by a hot engine. Post signs that read "NO SMOKING WITHIN 50 FEET" when working with open fuel lines or fuel tanks. a. Lubricate preformed packing (33) with clean fuel. Hydraulic fitting sealant can cause eye damage or skin irritation. Wash after skin contact. Wear safety goggles/glasses when using. Avoid contact with eyes or skin. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Be careful not to damage preformed packing when sliding over threads. Sharp edges of thread can cut or damage preformed packing. Damaged preformed packing will cause leakage and affect performance. b. Install preformed packing (33) and straight adapter (32). Apply hydraulic fitting sealant to threads of straight adapter and install tube reducer (8). c. Lubricate preformed packing (31) with clean fuel. d. Install preformed packing (31) and straight adapter (6). GO TO NEXT PAGE 4-57

Privacy Statement
Press Release
Contact