TM 5-3895-373-20
C. ALIGN - Continued.
WARNING
Screed
operations
present
a
crushing hazard. Stay clear of
screed during screed operations.
Failure to do so may result in death
or serious injury.
NOTE
Cribbing is used under the screed
only as a safety precaution. Do not
lower the screed onto the cribbing.
Cribbing
may
have
to
be
repositioned
during
alignment
procedure to allow for placement of
straightedge
and
to
view
measurement points.
v.
Remove one hex head cap screw (20).
WARNING
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
w.
Clean threads of hex head cap screw (20)
using thread locking compound solvent and
a clean cloth.
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
x.
Apply thread locking compound to threads
of hex head cap screw (20).
y.
Install hex head cap screw (20) and tighten
to 180 lb-ft (244 N.m) using socket wrench
adapter.
z.
Repeat steps u through x until all hex head
cap screws (20) are installed and tightened.
GO TO NEXT PAGE
15-145
