D. ASSEMBLE - TM-5-3895-373-20

15.20. ADJUST AND ALIGN MAIN AND EXTENSION - TM-5-3895-373-20_1166

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
1157

TM 5-3895-373-20 D. ASSEMBLE. 1. INSTALL PLATE SPACERS. NOTE Plate spacers are used to align screed extension plate with screed plate on extension screed. There may be no plate spacers or several plate spacers on the screed extension plate studs. If plate spacers are removed, they must be returned to the same locations from which they were removed to maintain screed plate alignment, or replaced with plate spacers of like thickness. a. Install plate spacers (9) onto screed extension plate studs (10) in the exact locations from which they were removed. b. Install spacers (7 and 8). c. Install flat washers (6) and self-locking nuts (5). Tighten self-locking nuts hand tight. 2. INSTALL SCREED EXTENSION BASE FRAME. a. Install screed extension base frame (3) onto screed extension plate (4). b. Install flat washers (2) and self-locking nuts (1). Tighten self-locking nuts to 37 lb-ft (50 N•m). NOTE FOLLOW-ON-TASK: Screed extension plate installed per TM 5-3895-373-10. END OF TASK 15-135

Privacy Statement
Press Release
Contact