TM 5-3895-373-20
15.19. REPAIR SCREED EXTENSION PLATE - Continued.
B.
CLEAN.
Cleaning solvent, P-D-680, is TOXIC and
flammable. Wear protective goggles and
gloves. Use only in a well ventilated area.
Avoid contact with skin, eyes, and clothes,
and do not breathe vapors. Keep away from
heat or flame. Never smoke when using
solvent; the flashpoint for Type III cleaning
solvent is 200°F (93,3°C). Failure to do so
may result in injury or death to personnel.
If personnel become dizzy while using
cleaning solvent, immediately get fresh air
and medical help. If solvent contacts skin or
clothes, flush with cold water. If solvent
contacts eyes, flush eyes with water and get
immediate medical attention.
1.
CLEAN ALL METAL PARTS WITH CLEANING
SOLVENT.
2.
SCRUB OFF HARD DEPOSITS WITH WIRE
SCRATCH
BRUSH.
WIPE
DRY
WITH
CLEANING CLOTH.
C.
INSPECT.
1.
INSPECT
SCREED
EXTENSION
PLATE
STUDS
FOR
STRIPPED
OR
WORN
THREADS. REPLACE EXTENSION PLATE IF
STUDS ARE DAMAGED.
2.
INSPECT SCREED EXTENSION PLATE FOR
WEAR OR BENDING. EXTENSION PLATE
MUST BE FLAT AND FREE OF CRACKS.
REPLACE EXTENSION PLATE IF EXTENSION
PLATE IS BENT OR CRACKED.
GO TO NEXT PAGE
15-134
