TM 5-3895-373-20
C.
INSTALL - Continued.
e.
Install roller chain (19) over rear sprocket wheel
assembly (10).
f.
Install chain connecting link (20) onto roller chain
(19).
g.
Position front sprocket wheel assembly (9) onto
mounting bracket on screed. Do not place the
sprocket assembly through roller chain (19) at
this time.
h.
Line up pin bore of left hand fluid passage bolt
(22) with the mounting bracket and install
assembly mounting pin (11). Do not install
retaining rings at this time.
i.
Hold right hand fluid passage bolt (23) so that it
does not rotate. Adjust sprocket wheel (24) to
line up pin bore of the right hand fluid passage
bolt with the mounting bracket.
j.
Remove assembly mounting pin (11) and front
sprocket wheel assembly (9) from the screed.
GO TO NEXT PAGE
15-37
