1. DISCONNECT HYDRAULIC HOSES - TM-5-3895-373-20

15.4. REPLACE/REPAIR CROWN ADJUSTMENT ASSEMBLY

2. REMOVE SPROCKET WHEEL ASSEMBLIES AND ROLLER CHAIN

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
1054

TM 5-3895-373-20 15.4. REPLACE/REPAIR CROWN ADJUSTMENT ASSEMBLY - Continued. A. REMOVE. 1. DISCONNECT HYDRAULIC HOSES. Hydraulic oil can be moderately flammable and can be an irritant to the skin, eyes, and respiratory system. Avoid prolonged exposure. Eye protection and rubber gloves must be worn when working with hydraulic oil. Thoroughly clean hoses and fittings before disconnecting. Always plug or cap off disconnected fittings to prevent intrusion of contaminants. Failure to properly clean and cap off connectors may result in system contamination and equipment damage. a. Place machinery wiping towels around fittings of hydraulic hoses (I through 4). b. Wipe all dirt and dust from fittings of hydraulic hoses (I through 4) with cleaning cloths. c. Tag and disconnect hydraulic hoses (1 through 4) from straight adapters (5 through 8). Drain oil from hoses into a utility pail. d. Plug hydraulic hoses (1 through 4) and cap straight adapters (5 through 8). e. Dispose of saturated machinery wiping towels and waste hydraulic oil in accordance with local procedures. GO TO NEXT PAGE 15-32

Privacy Statement
Press Release
Contact