TM 5-3895-385-23-2
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
JACKING AND LIFTING POINTS
INITIAL SETUP:
Tools and Special Tools
Equipment Conditions
General Mechanics Tool Kit (GMTK) (WP 0440, Vol
BMPM parked on level lot
3, Item 64)
BATTERY DISCONNECT switch OFF (TM 5-3895-
Drain pan (WP 0440, Vol 3, Item 15)
385-10)
Jack stands (WP 0440, Vol 3, Item 27)
Screed removed (WP 0224)
Personnel Required
Front screed arms removed (WP 0230)
91L
Estimated Time to Complete Task
1 hr
Assistant
JACKING POINTS
WARNING
Use lifting devices with caution. Vehicle weighs 26,400 lb (11,975 kg). Do not stand or put arms,
legs, or any body part under hoisted load. Do not walk under overhead load. Do not permit load to
swing while hoisted. Failure to comply may cause injury or death to personnel.
Ensure jack stands and jack are used only on level ground and on BMPM surfaces level with the
ground. Do not attempt to jack BMPM on unlevel ground or on slanted surfaces on BMPM.
Failure to comply may cause injury or death to personnel.
NOTE
Some hydraulic oil or other fluids may leak out of engine compartment when jacking the BMPM.
Have a drain pan and rags in place to capture hydraulic oil.
