TM 5-3895-385-23-2
0435
LOWERING THE BMPM
Figure 3. Location of Jacking Points.
1. Ensure the BMPM track brake override is not engaged (TM 5-3895-385-10).
2. Lift front of the BMPM at frame cross rail (Figure 3, Item 3) off the jack stands with a suitable lifting device.
3. Remove the jack stand on the front points of the rail (Figure 3, Item 2).
4. Lower the BMPM down onto ground.
5. Lift rear of the BMPM off the jack stands with a suitable lifting device.
6. Remove the jack stands on the rear points of the rail (Figure 3, Item 1).
7. Lower the BMPM down onto ground.
END OF TASK
