TM 5-3895-385-23-2
0330
Fuel Pump Actuator Removal -- Continued.
CAUTION
Dirt and debris can contaminate fuel system. Cap/plug all open fuel lines and ports to prevent
contamination from entering fuel system. Failure to comply may cause damage to equipment.
6. Cover fuel pump actuator (Figure 1, Item 5) cavity in fuel pump (Figure 1, Item 1).
END OF TASK
Fuel Pump Actuator Installation
1. Install two new O-rings (Figure 1, Items 3 and 4) onto fuel pump actuator (Figure 1, Item 5).
2. Install fuel pump actuator (Figure 1, Item 5) and three mounting screws (Figure 1, Item 6) into fuel pump
(Figure 1, Item 1).
3. Connect fuel filter inlet line (Figure 1, Item 2) to fuel pump (Figure 1, Item 1).
4. Connect wiring harness W25 C9 (Figure 1, Item 7) to fuel pump actuator (Figure 1, Item 5) connector.
END OF TASK
FOLLOW-ON TASK
1. Install engine (WP 0323).
2. Install battery ground cable (WP 0357).
3. Set BATTERY DISCONNECT switch to ON (TM 5-3895-385-10).
4. Verify proper operation.
5. Dispose of captured fluids and soiled rags IAW local SOP.
END OF TASK
END OF WORK PACKAGE
0330-3/4 blank