TM 5-3895-385-23-2
0236
Screed Extension Heater Element Removal -- Continued.
4. Remove eight bolts (Figure 1, Item 4), eight lock washers (Figure 1, Item 5), four extension element clamps
(Figure 1, Item 6), metal bar (Figure 1, Item 9), and screed extension heater element (Figure 1, Item 8) from
screed extension (Figure 1, Item 7). Discard lock washers.
END OF TASK
Screed Extension Heater Element Installation
1. Install screed extension heater element (Figure 1, Item 8) onto screed extension (Figure 1, Item 7), ensuring it
is centered in the screed extension and the cloth insulator is facing up.
2. Install metal bar (Figure 1, Item 9) over screed extension heater element (Figure 1, Item 8).
3. Install eight bolts (Figure 1, Item 4), eight new lock washers (Figure 1, Item 5), and four extension element
clamps (Figure 1, Item 6) over metal bar (Figure 1, Item 9) and into screed extension.
4. Install screed extension heat box cover (Figure 1, Item 3) onto screed extension (Figure 1, Item 7).
5. Install 14 bolts (Figure 1, Item 11) and new lock washers (Figure 1, Item 10) onto screed extension heat box
cover (Figure 1, Item 3).
6. Install screed extension heater element cable (Figure 1, Item 2) into screed heater box cable (Figure 1, Item
1).
END OF TASK
FOLLOW-ON TASK
1. Install screed extension attack angle adjustment screw (WP 0238).
2. Verify proper operation.
END OF TASK
END OF WORK PACKAGE
0236-3/4 blank
