TM 5-3895-385-23-2
0226
Tilt Screw Installation
1. Install straight pin (Figure 1, Item 4) along with spacer (Figure 1, Item 3) into screed extension (Figure 1, Item
2).
2. Install tilt screw shaft (Figure 1, Item 9) onto end gate.
3. Install two bolts (Figure 1, Item 6), new lock washers (Figure 1, Item 7), and tilt screw bracket (Figure 1, Item
8) onto mounting bracket (Figure 1, Item 1).
4. Install tilt screw (Figure 1, Item 5) into straight pin (Figure 1, Item 4) and into tilt screw shaft (Figure 1, Item 9).
END OF TASK
FOLLOW-ON TASK
Set BATTERY DISCONNECT switch to ON (TM 5-3895-385-10).
END OF TASK
END OF WORK PACKAGE
0226-3/4 blank