TM 5-3895-385-23-2
0226
Tilt Screw Removal
Figure 1. Tilt Screw -- Removal/Installation.
1. Remove tilt screw (Figure 1, Item 5) from tilt screw shaft (Figure 1, Item 9).
2. Remove two bolts (Figure 1, Item 6), lock washers (Figure 1, Item 7), and tilt screw bracket (Figure 1, Item 8)
from mounting bracket (Figure 1, Item 1). Discard lock washers.
3. Remove tilt screw shaft (Figure 1, Item 9) from end gate.
4. Remove straight pin (Figure 1, Item 4) along with spacer (Figure 1, Item 3) from screed extension (Figure 1,
Item 2).
END OF TASK