TM 5-3895-373-34
A.
REMOVE.
1.
REMOVE
CONVEYOR
ROLLER
AND
BEARING UNITS AS AN ASSEMBLY.
a.
With the help of another person, support
conveyor roller (1) and remove hex head cap
screws (2) and flat washers (3).
b.
Lift and remove conveyor roller with bearing
units (4) attached.
2.
REMOVE BEARING UNITS FROM CONVEYOR
ROLLER.
a.
Loosen, but do not remove, set screws (5).
b.
Remove bearing units (4) from conveyor roller
(I).
GO TO NEXT PAGE
2-885