TM 5-3895-373-34
2.57
REPLACE SCREED TRAVEL LOCK VALVE - Continued
B.
INSTALL Continued.
2.
CONNECT HYDRAULIC HOSES.
Hydraulic fitting sealant can cause eye
damage or skin irritation. Wash after
skin
contact.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water and
get immediate medical attention.
a.
Apply hydraulic fitting sealant to threads of tee
(6).
b.
Connect hoses (2 and 3) to tee (6). Tighten
hoses.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound contacts
eyes, flush eyes with water and get
immediate
medical
attention.
c.
Remove set screw (7). Apply thread
locking compound to threads of set
screw and reinstall into adjustment knob.
Do not tighten set screw.
d.
Ensure adjustment knob turns freely
Ensure screed lock valve is fully closed
before operation of paving machine. If
valve is not fully closed, screed may
drop suddenly, causing serious injury
or death to personnel.
e.
Ensure screed travel lock valve (1) is fully closed
per TM 5-3895-373-10.
NOTE
FOLLOW-ON-TASK: Raise screed steps per TM 5-3895-373-10.
END OF TASK
2-798
