TM 5-3895-373-34
2.58
REPLACE/REPAIR EXTENSION SCREED HEIGHT ADJUSTMENT - Continued
A.
REMOVE Continued.
4.
REMOVE LIFT JACK ASSEMBLY.
a.
Remove and discard spring pins (26).
b.
Remove hex head cap screws (27), lockwashers
(28),
and
flat
washers
(29).
Discard
lockwashers.
c.
Remove flange plates (30) and spacers (31).
d.
Pull outer and inner lift jack assemblies (18 and
19) free of vertical adjustment block assemblies
(32) and lift entire assemblies up and free of
extension screed frame.
GO TO NEXT PAGE
2-802
