TM 5-3895-373-34
A.
REMOVE - Continued.
b.
When removing a control valve or flow divider,
it
may
be
necessary
to
remove
other
components that prevent access to the item
being removed. The following components
need to be removed to access specific control
valves and flow dividers located on the valve
panel.
Tow point flow control valve
Auger/conveyor speed control valves
Tow point mount plate
Return manifold
DCA housing
c.
Refer to chart below for a listing of the items to
be removed. The center column lists the items
which need to be removed first before a
specific control valve or flow divider can be
removed. The referenced paragraph provides
instructions
to
remove
the
item
listed.
ITEM TO BE REMOVED
REMOVE THIS ITEM FIRST
PARAGRAPH
Tow point flow divider
None
Tow point control valves
Tow point mount plate
A.4
Left augerlconveyor control valve
Left augerlconveyor speed control
A.6 and A.7
valve
Right auger/conveyor control valve
DCA housing
A.2
right auger/conveyor speed control
A.5 and A.7
valve
Auger/conveyor flow divider
Return manifold A.3
Valve and cylinder flow divider
Return manifold A.3
Stack valve
None
Right auger/conveyor speed control
valve
DCA housing A.2
Left auger/conveyor speed control
valve
None
GO TO NEXT PAGE
2-737
