TM 5-3895-373-34
2.54.
REPAIR HYDRAULIC HOSES, TUBES, AND FITTINGS - Continued
E.
CHARGE AND FLUSH - Continued.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93, 3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
Hydraulic oil can be moderately
flammable and can be an irritant to
the skin, eyes, and respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
d.
Shut off engine and remove key from ignition
switch per TM 5-3895-373-10. Wipe up all
spilled hydraulic oil with machinery wiping
towel. Clean away oil residue with cleaning
cloths
and
cleaning
solvent.
NOTE
FOLLOW-ON-TASK:
Close access doors and covers as applicable per
TM 5-3895-373-10.
END OF TASK
2-734
