TM 5-3895-373-34
A.
REMOVE - Continued.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the skin, eyes, and respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
i.
Tag and disconnect tubes (22 and 23) from
elbow (24) and swivel tee (25). Plug tubes and
cap elbow and swivel tee. Loosen but do not
remove swivel tee to allow for removal of hose
(26).
j.
Tag and disconnect hose (26) from elbow (27)
using a combination wrench.
k.
Tag and disconnect hoses (28 and 29) from
elbows (30 and 31) on brake valve. Plug hoses
and cap elbows.
I.
Tag and disconnect hose (32) and tube (33)
from tee (34) at screed vibration solenoid
valve. Plug hose and tube and cap tee.
m.
Tag and disconnect tube (35) from tee (36) at
screed vibration solenoid valve. Plug tube and
cap tee.
n.
Disconnect screed vibration solenoid valve
electrical
connector
(37)
from
harness
electrical connector (38).
o.
Disconnect brake valve electrical connector
(39) from harness electrical connector (40).
p.
Remove
hex
head
cap
screws
(41),
lockwashers (42), and ground wire lead (43)
from return manifold bracket (44). Discard
lockwashers.
q.
Remove return manifold (9) and set aside.
GO TO NEXT PAGE
2-741
