TM 5-3895-373-34
2.48
REPAIR AUGER/CONVEYOR SPEED CONTROL VALVE - Continued. ’4
D.
ASSEMBLE - Continued.
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes,
flush
eyes
with
water
and
get
immediate medical attention.
d.
Apply pipe sealant to threads of elbow (16).
e.
On the right auger/conveyor speed control
valve, install elbow (16) into the top port of
cross (14). Position the elbow so that when
tightened it is at a 45° angle from straight
adapter (17) rear port. On the left valve
position elbow so that when tightened it is
at a 90° angle from straight adapter.
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
f.
Apply hydraulic fitting sealant to exposed
threads of straight adapter (19) and elbow
(16).
g.
Install swivel elbow (18) onto straight
adapter (19). Position the swivel elbow so
that when tightened it points to the inside of
paving machine as shown.
h.
Install tube reducer (15) onto elbow (16).
GO TO NEXT PAGE
2-660
