TM 5-3895-373-34
2.48
REPAIR AUGER/CONVEYOR SPEED CONTROL VALVE - Continued.
C.
INSPECT - Continued.
3.
INSPECT RIVET.
a.
Inspect rivet (29), surface F, for thread
damage. Replace rivet if threads are
damaged.
b.
Replace rivet (29) if rivet shaft G is bent.
c.
Inspect surface (H) for scoring or wear.
Replace if scoring or wear is detected.
D.
ASSEMBLE.
1.
ASSEMBLE
AUGER/CONVEYOR
SPEED
CONTROL VALVE.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Ensure that valve body (24) is completely
dry. Apply a thin coating of thread locking
compound (Item 13, Appendix B) to orifice
(36), mating surface A, inside of valve body.
b.
Install orifice (36) into rivet end of valve
body (24).
GO TO NEXT PAGE
2-656
