TM 5-3895-373-34
D.
ASSEMBLE - Continued.
2.
ASSEMBLE CROSS.
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes,
flush
eyes
with
water
and
get
immediate medical attention.
a.
Apply pipe sealant to pipe threads of
straight adapter (19) and install into cross
(14). This is the bottom of the cross.
Tighten straight adapter.
b.
Apply pipe sealant to pipe threads of
straight adapter (17) and install into either
side of cross (14). Tighten straight adapter.
This is the rear port of the cross. When the
cross is installed, this straight adapter will
point to the front of the paving machine.
c.
Apply pipe sealant to pipe threads of elbow
(13) and install into the front port on cross
(14). Orient elbow so that when tightened it
points at a 90° angle from the bottom port
as shown.
GO TO NEXT PAGE
2-659
