TM 5-3895-373-34
2.35
REPLACE TRACK ROLLERS.
This task covers:
a.
Inspect
b.
Remove
c.
Clean
d.
Install
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-20
(Item 106, Appendix D)
TM 5-3895-373-24P
Outside micrometer (Item 19, Appendix D)
Torque wrench (Item 132, Appendix D)
Equipment Condition:
Wire scratch brush (Item 13, Appendix D)
Paving machine jacked and cribbed (for track maintenance) per
TM 5-3895-373-20.
Materials/Parts:
Track chain assembly removed per paragraph 2.41.
Cleaning cloth (Item 6, Appendix B)
Cleaning solvent (Item 31, Appendix B)
NOTE
Thread locking compound (Item 13, Appendix B)
Thread locking compound solvent (Item 32, Appendix B)
Upper and lower track rollers are identical. Differen-
Track rollers
ces in mounting hardware are addressed in text.
Remove track chain assembly only on side being
repaired. This procedure refers to track rollers on
right hand track frame. Procedure is identical for
track rollers on left hand track frame. Track rollers
on right hand track frame are shown in this
procedure.
GO TO NEXT PAGE
2-501
