TM 5-3895-373-34
2.34
REPLACE TRACK FRAME - Continued.
B.
REPLACE Continued.
d.
Install hex head cap screws (2) with lockwashers
(3) through track frame (1) into main frame (4).
e.
Insert track frame offset wrench onto torque
wrench at a 90° angle.
f. Tighten hex head cap screws (2) to 570 Ib-ft
(773 N•m).
g. Remove transmission jack and cribbing from
beneath track frame (1).
NOTE
FOLLOW-ON-TASKS: Install track rollers per paragraph 2.35.
Install track tensioning cylinder per paragraph 2.37.
Install track idler roller assembly per paragraph 2.36.
Install track chain assembly per paragraph 2.41.
Lower paving machine from jacks per TM 5-3895-373-20.
Install screed tow arm per TM 5-3895-373-20.
END OF TASK
2-500
