TM 5-3895-373-34
A.
REMOVE.
1.
REMOVE HYDRAULIC LINE AND DRAIN OIL.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
should be worn when working with
hydraulic oil.
a.
Place
machinery
wiping
towel
around
hydraulic tube (1) and mating straight
adapter (2). Place backup wrench across
flats of straight adapter and loosen tube
fitting.
b.
Disconnect fitting on tube (1). Plug
hydraulic tube fitting with protective cap. If
saturated, dispose of machinery wiping
towel in accordance with local procedures.
c.
Place drain pan below brake. Remove plug
(3) with flat washer (4). Drain gear oil from
brake. Reinstall plug and flat washer.
d.
Place drain pan below speed reduction
gearbox. Remove plug (5) and seal ring
(6). Drain gear oil from speed reduction
gearbox. Reinstall plug and seal ring.
Dispose of used gear oil in accordance with
local procedures.
GO TO NEXT PAGE
2-471
