TM 5-3895-373-34
2.32
REPLACE/REPAIR PROPULSION MOTOR - Continued.
G.
INSTALL - Continued.
2.
INSTALL PROPULSION MOTOR.
a.
Place cribbing in front of speed reduction
gearbox
beneath
propulsion
motor
installation location.
Hydraulic oil can be moderately flammable
and can be an irritant to the skin, eyes, and
respiratory
system.
Avoid
prolonged
exposure. Eye protection and rubber gloves
should be worn when working with hydraulic
oil.
b.
Lubricate both faces of mounting flange
(11) with a light coating of clean hydraulic
oil.
c.
Install mounting flange (11) over drive shaft
of propulsion motor (10).
d.
Install lockwashers (9) onto hex head cap
screws (8).
Thread locking compound can cause eye
damage. Wear safety goggles/glasses when
using.
Avoid
contact
with
eyes.
If
compound contacts eyes, flush eyes with
water and get immediate medical attention.
e.
Apply thread locking compound (Item 13,
Appendix B) to threads of hex head cap
screws (8).
f.
With the help of another person, lift
propulsion motor (10) and insert spline
shaft into mating spline coupler in speed
reduction gearbox.
g.
Install lockwashers (9) and hex head cap
screws (8). Tighten cap screws to 125 lb-ft
(170 N•m).
h.
Remove cribbing.
GO TO NEXT PAGE
2-468
