TM 5-3895-373-34
E.
ASSEMBLE - Continued.
8.
INSTALL
VALVE
ASSEMBLY
INTO
HYDRAULIC ASSEMBLY HOUSING.
Thread locking compound can cause eye
damage. Wear safety goggles/glasses when
using.
Avoid
contact
with
eyes.
If
compound contacts eyes, flush eyes with
water and get immediate medical attention.
a.
Coat threads of valve sleeve (35) with
thread
locking
compound
(Item
14,
Appendix B).
Valve sleeve can only be inserted into
hydraulic assembly housing using valve
sleeve installation tool. Do not force valve
sleeve into hydraulic assembly housing.
Damage to valve sleeve assembly and
hydraulic assembly housing can result from
improper installation of valve sleeve.
b.
Install valve sleeve (35) into port A of
hydraulic assembly housing (24) with valve
sleeve installation tool.
c.
Install
hydraulic
pistons
(34)
and
flat
washers
(33)
into
hydraulic
assembly
housing (24).
d.
Install springs (32) and washers (31).
Hydraulic oil can be moderately flammable
and can be an irritant to the skin, eyes, and
respiratory system. Avoid prolonged expos-
ure. Eye protection and rubber gloves must
be worn when working with hydraulic oil.
e.
Lubricate o-rings (30) with clean hydraulic
oil.
Be careful not to damage o-rings
when sliding over threads. Sharp
edges of thread can cut or damage o-
ring. Damaged o-ring will cause
leakage and affect performance.
f.
Install o-rings (30) onto plugs (29).
g.
Install plugs (29) into hydraulic assembly
housing (24).
h.
Install plugs (28).
GO TO NEXT PAGE
2-463
