TM 5-3895-373-34
2.32
REPLACE/REPAIR PROPULSION MOTOR - Continued.
E.
ASSEMBLE - Continued.
7.
INSTALL PRESSURE VALVE ASSEMBLY INTO
HYDRAULIC ASSEMBLY HOUSING.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
a.
Lubricate o-ring (44) with clean hydraulic oil.
Be careful not to damage o-ring when
sliding over threads. Sharp edges of
thread can cut or damage o-ring.
Damaged o-ring will cause leakage
and affect performance.
b.
Install o-ring (44) onto valve sleeve (43).
c.
Install valve sleeve (43) into hydraulic
assembly housing (24).
d.
Install steel ball (42), spring (41), shim (40),
and plug (39) into valve sleeve (43).
e.
Install screw (38) and nut (37).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
f.
Coat threads of set screw (36) with thread
locking compound (Item 14, Appendix B).
g.
Install set screw (36).
GO TO NEXT PAGE
2-462
