TM 5-3895-373-34
2.32
REPLACE/REPAIR PROPULSION MOTOR.
This task covers:
a.
Remove
b.
Disassemble
c.
Clean
d.
Inspect
e.
Assemble
f.
Adjust
g.
Install
INITIAL SETUP
Tools:
Materials/Parts:
General mechanic’s automotive tool kit
Cleaning cloth (Item 6, Appendix B)
(Item 106, Appendix D)
Cleaning solvent (Item 31, Appendix B)
Centering jig (Item 2, Appendix C)
Emery cloth (Item 5, Appendix B)
Combination wrench (Item 115, Appendix D)
Gasket sealing compound (Item 11, Appendix B)
Drain pan (Item 63, Appendix D)
Hydraulic fitting sealant (Item 26, Appendix B)
Hex head cap screws (Item 26, Appendix D)
Hydraulic oil (Item 21, Appendix B)
Hex head cap screws (Item 27, Appendix D)
Lint-free cloth (Item 7, Appendix B)
Hex head driver socket (Item 89, Appendix D)
Petrolatum (Item 24, Appendix B)
Hex head driver socket (Item 90, Appendix D)
Protective caps (Item 3, Appendix B)
Hex head driver socket (Item 91, Appendix D)
Tags (Item 34, Appendix B)
Hydraulic systems test and repair tool outfit
Thread locking compound (Item 13, Appendix B)
(HSTRU) (Item 108, Appendix D)
Thread locking compound (Item 14, Appendix B)
Micrometer depth gage (Item 44, Appendix D)
Thread locking compound (Item 15, Appendix B)
O-ring tool (Item 103, Appendix D)
Thread locking compound solvent (Item 32, Appendix B)
Plastic hammer (Item 50, Appendix D)
Lockwashers
Retaining ring pliers (Item 65, Appendix D)
O-rings
Shaft seal installation tool (Item 21, Appendix C)
Preformed packings
Snap ring pliers (Item 66, Appendix D)
Metal seal rings
Thickness gage (Item 46, Appendix D)
Shaft assembly
Torque wrench, 0 to 175 Ib-ft, 1/2 in. drive
Shims
(Item 132, Appendix D)
Universal puller kit (Item 69, Appendix D)
Personnel Required:
Valve sleeve installation tool (Item 26, Appendix C)
Two 62B construction equipment repairers. Second person to
assist with removal and installation of propulsion motor from
speed reduction gearbox.
References:
TM 5-3895-373-20
TM 5-3895-373-24P
TM 9-4940-468-14
Equipment Condition:
Evacuate oil from hydraulic system per paragraph 2.54.
Paving machine jacked and cribbed per TM 5-3895-373-20.
GO TO NEXT PAGE
2-442
