TM 5-3895-373-34
B.
INSTALL - Continued.
d.
Apply electrical insulating compound to male
terminals of harness electrical connector (1).
e.
Connect pump pilot control valve electrical
connector (3) to harness electrical connector (1).
3.
CHECK PAVING MACHINE CONTROL HANDLE
TRACKING.
a.
Start engine per TM 5-3895-373-10 and drive
paving machine forward for several hundred feet
with both left and right control handles pressed
forward evenly. Repeat the same in reverse.
Check for mistracking in left and right tracks in
forward and reverse directions. Shut off engine.
b.
Control handles may need adjustment if left and
right tracks are not moving together at the same
speed. Refer to TM 5-3895-373-20 for control
handle adjustment procedure.
NOTE
FOLLOW-ON-TASKS:
Install right access cover per TM 5-3895-373-10.
Close right access door per TM 5-3895-373-10.
Close front top right access door per TM 5-3895-373-10.
END OF TASK
2-441
