TM 5-3895-373-34
A.
REMOVE - Continued.
3.
REMOVE HYDRAULIC FITTINGS.
a.
Loosen adapter nuts and remove elbows (12)
and preformed packings (13) from adapter
blocks (14). Discard preformed packings.
b.
Remove socket head cap screws (15).
c.
Remove adapter blocks (14) and preformed
packings (16).
d.
Remove straight adapters (17 and 18) and
preformed packings (19 and 20). Discard
preformed packings.
B.
DISASSEMBLE.
1.
REMOVE HYDRAULIC ASSEMBLY HOUSING.
a.
Measure
length
of
exposed
threads
on
adjustment bolt (21). This measurement will be
used at reassembly.
b.
While holding adjustment bolt (21) with wrench,
remove nut (22).
c.
Remove socket head cap screws (23).
d.
While turning adjustment bolt (21) clockwise,
remove hydraulic assembly housing (24), o-ring
(25),
and
preformed
packing
(26)
from
propulsion motor (10). Discard o-ring and
preformed packing.
GO TO NEXT PAGE
2-445
