TM 5-3895-373-34
2.32
REPLACE/REPAIR PROPULSION MOTOR - Continued
A.
REMOVE - Continued.
2.
REMOVE PROPULSION MOTOR.
Propulsion motor weighs approximately 70 lbs
(32 kg). Place cribbing beneath propulsion
motor prior to removal from speed reduction
gearbox. Damage to equipment and personnel
injury may result from unexpected movement of
propulsion motor.
NOTE
Universal joint, 1/2 in. by 1/2 in., may be needed
to access hex head cap screws.
a.
Place cribbing beneath propulsion motor.
b.
Remove
hex
head
lockwashers (9). Discard lockwashers.
c.
With the help of another person, pull propulsion
motor (10) straight back from speed reduction
gearbox. Set motor down on cribbing.
d.
Remove mounting flange (11) by tapping with a
plastic hammer.
e. Take propulsion motor (10) to clean work area
for disassembly and repair.
GO TO NEXT PAGE
2-444
